Pot Magnets

Pot or Cap Magnets substantially increase the holding ability of disc and ring magnets that are fixed permanently and located in the centre of the steel pot or cap.

Pot Magnets

Pot or Cap Magnets substantially increase the holding ability of disc and ring magnets that are fixed permanently and located in the centre of the steel pot or cap. The lower side of the magnet is in direct contact with bottom of the pot and the top side of the magnet is fractionally lower than the top edges of the pot. The outside diameter of the magnet less than the inside diameter of the pot, leaving a 2-4 mm spacing around the magnet which is generally filled with resin. A very strong locking field exists around the perimeter of the pot between the top of the magnet and the pot top edge returning the reverse side field. Alternative mounting options are available as shown in the photos. 

Pot magnets are ideally suited to lock directly, with full contact, to flat steel for a very strong adhesion that is removable and re-useable. Pot Magnets have hold values starting at 2kg through to 170kg. There uses are unlimited, for holding many things: eg. Wiring to steel beams, portable lead lamps, banners, flags, rubbish bags, building paper to steel beams, lifting, locating, locking, signs, eddy current braking, removable clearance lights on vehicles and untold other uses. Types available in order of strength: Neodymium, Ceramic Ferrite and Alnico.

VIEW PRODUCTS